AIMS Power 6000 Watt Pure Sine Inverter Charger - 24VDC to 120VAC - LISTED TO UL & CSA

AIMS Power 6000 Watt Pure Sine Low Frequency Inverter, single phase with built-in battery charger and transfer switch is perfect for large-sized industrial applications that depend upon power being available even under heavy load. This heavy-duty inverter charger is ready to go wherever you need it. Use this product for renewable solar, off-grid, business back up power, mobile and emergency backup power applications anywhere that uses 100/110/120 volts of alternating current. This product also has auto frequency detection that allows users to operate at either 50 or 60 hertz.

This AIMS power inverter charger includes a powerful 60 amp charger and is capable of accepting any source of 120v AC power to charge batteries, including a gas or diesel generator or shore power at an RV park/truck stop. It will even accept power from an extension cord plugged into your wall outlet at home.

The 6000 watt inverter charger is capable of a 18000 watt surge for 20 seconds and can run at 6000 watts continuously. This inverter will never completely drain your batteries as it's low-voltage shut-down keeps the voltage at either 20 volts or 21 volts depending on your selection. With the battery priority mode, you can set your inverter to run directly off of a battery back-up system instead of a generator or tertiary source of AC Power. The inverter charger comes with a power saver mode that pulses every 30 seconds, attempting to detect a necessary load of 25 watts or more before it will turn on. Otherwise, the inverter will “sleep” and draw right around a half an amp per hour, saving you precious reserve power in your batteries until you need it.

Features:

• 6000 watt low frequency inverter
• 18000 watt surge for 20 seconds 300% surge capability
• 24 Volt DC
• Single phase 120Vac output
• Listed to UL 458, 1741, 1012 and CSA 22.2 NO. 107.1 & 107.2
• Battery priority selector
• Terminal block
• Marine coated and protected
• Multi stage smart charger 60 Amp charges GEL, Lead, AGM, Lithium
• Remote panel available LED or LCD
• Auto frequency
• 10msec typical transfer time
• Selectable 25W power save mode (hibernation)
• 7 battery type settings for charger
• Allows start up and through power with depleted batteries

Output Specifications:

• Continuous Output Power: 6000 Watts
• Surge Rating: 18000 Watts (20 Seconds)
• Output Waveform: Pure Sine/Same as input (Bypass Mode)
• Output Voltage: 100-110-120Vac
• Output breaker: 80 Amps
• Nominal Efficiency: >88% (Peak)
• Line Mode Efficiency: >95%
• Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz
• Typical Transfer Time: 10ms (Max)
• THD: < 10% DC
• Ambient Operating Temperature: 14°F to 122°F (-10°C to 50°C)

Input Specifications:

• Nominal Input Voltage: 24.0Vdc
• Minimum Start Voltage: 20.0Vdc
• Low Battery Alarm: 21.0Vdc-22.0Vdc
• Low Battery Trip: 20.0Vdc-21.0Vdc
• High Voltage Alarm: 32.0Vdc
• Low Battery Voltage Restart: 26.6Vdc
• Idle Consumption: 52.5 watts
• Power Saver Mode Idle Consumption: <25 watts

Charger Specifications:

• Output Voltage: Depends on battery Type
• Charger Rate: 60A
• Over charge protection shutdown: 31.4V
• Selectable charge setting based on battery type
• Adjustable charge current: off-15%-100%
• Four stage smart charger

Transfer Switch Specifications

• 80 am automatic transfer switch
  
• 10 ms (max)

Dimensions:

• Unit Weight: 108 lbs.
• Unit Size L x W x H: 19 x 16.5 x 8 inches
• Shipping Weight: 113 lbs.
• Shipping L x W x H: 30.5 X 14.25 X 13.75 inches

- Listed to UL 458, 1741, 1012 and CSA 22.2 NO. 107.1 & 107.2

- 2 Year Warranty

Manual